水研环境 Water-Research Environment

MBR

Flat-sheet MBR membrane modules

SY-FS80, SY-FS100, and SY-FS150 flat-sheet MBR frames. Areas, flows, dimensions, and weights are the figures printed in the 2025 product manual.

Flat-sheet MBR membrane for municipal and industrial tanks.

Shuiyan flat-sheet MBR frame and PVDF sheets, from the 2025 product manual

SY-FS80 flat-sheet MBR frames

SY-FS80 flat-sheet MBR frames
SY-FS80-140SY-FS80-120SY-FS80-100SY-FS80-80SY-FS80-60
Sheets1401201008060
Effective area112 m²96 m²80 m²64 m²48 m²
Treatment flow42–68 m³/d35–60 m³/d30–50 m³/d23–40 m³/d17–30 m³/d
Membrane air scour1.5–1.9 m³1.3–1.6 m³1.1–1.3 m³0.85–1.1 m³0.64–0.8 m³
Effluent suspended solids<1.0 mg/L<1.0 mg/L<1.0 mg/L<1.0 mg/L<1.0 mg/L
Aeration connectionDN65DN65DN65DN32DN32
Permeate connectionDN50DN50DN50DN50DN50
Outline2200×610×1500 mm1900×610×1500 mm1600×610×1500 mm1300×610×1500 mm1000×610×1500 mm
Weight630 kg560 kg490 kg340 kg290 kg

Flat-sheet chapters are in the Chinese edition of the 2025 product manual. The shorter English brochure does not reprint them. Numbers below are transcribed from that Chinese edition.

SY-FS100 flat-sheet MBR frames

SY-FS100 flat-sheet MBR frames
SY-FS100-140SY-FS100-120SY-FS100-100SY-FS100-80SY-FS100-60
Sheets1401201008060
Effective area140 m²120 m²100 m²80 m²60 m²
Treatment flow45–76 m³/d38–65 m³/d32–54 m³/d26–43 m³/d19–34 m³/d
Membrane air scour1.6–2.1 m³1.4–1.8 m³1.2–1.5 m³0.96–1.2 m³0.72–0.9 m³
Aeration connectionDN65DN65DN65DN32DN32
Permeate connectionDN50DN50DN50DN50DN50
Outline2200×630×1500 mm1900×630×1500 mm1600×630×1500 mm1300×630×1500 mm1000×630×1500 mm
Weight700 kg620 kg540 kg380 kg320 kg

SY-FS150 flat-sheet MBR frames

SY-FS150 flat-sheet MBR frames
SY-FS150-140SY-FS150-120SY-FS150-100SY-FS150-80
Sheets14012010080
Effective area210 m²180 m²150 m²120 m²
Treatment flow76–126 m³/d65–108 m³/d54–90 m³/d43–60 m³/d
Membrane air scour1.68–2.1 m³1.44–1.8 m³1.2–1.5 m³1.0–1.2 m³
Aeration connectionDN65DN65DN65DN65
Permeate connectionDN50DN50DN50DN50
Outline2200×630×2500 mm1900×630×2500 mm1600×630×2500 mm1300×630×2500 mm
Weight900 kg780 kg660 kg520 kg

Common flat-sheet MBR frame parameters

Common flat-sheet MBR frame parameters
ItemPublished value
MLSS8,000–18,000 mg/L
Effluent turbidity<1.0 NTU
Transmembrane pressure5–20 kPa
pH / temperature2–13 / 5–40°C
Frame material304 stainless steel
Aeration connectionRaised-face flange, 1.0 MPa, UPVC
Permeate connectionUnion, UPVC

The manual describes ABS supports and a reinforced PVDF flat sheet, normally run under suction. Air scour is from the bottom of the frame. Stated service life under normal conditions is 5 to 8 years.

How the series is used

  • Used where a membrane tank replaces a secondary clarifier, or where an existing tank must be upgraded without a new clarifier.
  • Frames, aeration, and cleaning are scoped with the membrane system package when Shuiyan is to carry the process duty.
  • Common frame limits are MLSS 8,000–18,000 mg/L, effluent turbidity below 1.0 NTU, TMP 5–20 kPa, and pH 2–13 at 5–40°C.

What to send with the quotation

  • Wastewater type and any discharge or reuse standard you must meet.
  • Design capacity in m³/d, and whether the flow is steady or seasonal.
  • Temperature, suspended solids, and, for NF or RO, salinity.
  • Whether you need modules only, a packaged plant, or a system package with commissioning.
Request a technical quotation

Related