Application
Water reuse
Tertiary ultrafiltration, nanofiltration, and reverse osmosis after a biological or MBR step, when the plant has to return water rather than only discharge it.
Reuse is a design problem, not a single element. A municipal upgrade may stop at MBR if the discharge standard is the target. A factory that must reuse water will usually add UF and then NF or RO, with the recovery set by scaling and by the concentrate route.
Beijing Zoo is published as a water-quality upgrade at 50,000 m³/d. Industrial references such as Yulin, the Xi’an cell plant, and Angang are reuse or advanced-treatment duties at the capacities on the project pages. No recovery percentage is stated here.
- Tertiary polishing and reuse after MBR.
- Brackish and low-pressure RO where the salinity allows SY-BW or SY-ULP.
- Seawater elements (SY-SW) only when the water is actually seawater.
Domestic references
5,000 m³/d
28,800 m³/d
16,000 m³/d
Xi’an Aerospace Base 5GW cell wastewaterXi’an Aerospace Base
14,400 m³/d
Angang coking wastewaterAngang
35,664 m³/d
Shendong Daliuta mine waterDaliuta
